Field of use

Industrial

Environmental testing of parts, cement curing and the factory QC lab

For automotive, electronics and plastics part makers, the cement, oil, gas and petrochemical industries and industrial research centres. Find your test; the right model, and why, is right beside it.

Find the right device Talk to an expert

Three-year warranty
Free installation in every city
ISO 9001 · ISO 13485

Materials testing laboratory with tensile testing machines

Measuring a metal part with a digital caliper

Buying guide

What does your lab need to do?

Find your task; the devices that fit it, and why each one, are right beside it.

Environmental testing of parts

Putting automotive, electronic, telecom and plastic parts through defined cold, heat and humidity.

-40 to 120 °CUp to 98 % RHSMS alarms

Our recommendation

Environmental test chamber -40 to 120 °C200, 500 and 1000 L; computer link and an SMS alarm when temperature or humidity leaves its range; temperature ramps to orderACH620LACH650LACH6100

Curing cement and concrete specimens

Holding specimens at a controlled temperature and humidity through the curing period, with time control.

Our recommendation

Touch control cement curing cabinet200 and 500 L; 10.4-inch colour touch display and data logging to an SD cardXIC620 TCXIC650 TC

Digital cement curing cabinet200 and 500 L with digital control of temperature, humidity and timeXIC620XIC650

Drying samples and heat testing

Drying samples to constant weight and holding parts at high temperature.

Up to 200 °C

Our recommendation

Touch control laboratory oven 200 °CColour touch display and data logging; programmes to orderU629TCU631TCU632TCU640TC

Digital laboratory oven 200 °CDigital PID control; 55 to 400 LU629U631U632U640

Chemical and elemental analysis

Measuring sodium, potassium, lithium, calcium and barium by flame photometry, and heating and digesting samples under a hood.

Na · K · Li · Ca · Ba

Our recommendation

Industrial digital flame photometer (research)Digital, with 1-, 3- or 5-point automatic calibration620G

Digital six-position heating mantleSix 500 mL flasks at once, digital PID controlHD626

Chemical fume hoodChemical fume hood with an exhaust fan; 80 to 240 cm wideCH608CH610CH612CH615+2

Cold testing and low-temperature storage

Keeping materials and samples at a low, steady temperature.

Down to -70 °C

Our recommendation

Touch control laboratory freezer -70 °CDown to -70 °C, with data logging and a temperature alarmXF620 TCXF640 TC

Digital laboratory freezer -40 °C-40 °C, 200 or 400 LCF620LCF640L

Why labs choose Fater

1983Founded; more than 200 device models today

10,000+Units in service across Iran

3 yearsWarranty, plus ten years of service and spare parts

ISO 13485and ISO 9001 from URS (UK), with Ministry of Health manufacturing licences

Questions buyers ask

Not answered here? Call a Fater engineer.

021-88552340

Can you build a chamber to a special size or specification?

Yes. Fater engineers design the features and specification around your needs, then send the price and delivery time as a proposal.

Will I know if the temperature leaves its range?

The environmental chamber sends an SMS alarm when temperature or humidity leaves the range you set, and can text the readings at intervals you choose. It can also be monitored from a computer.

What about installation and warranty?

Installation and commissioning on site, in any city, is free. It comes with a three-year warranty and ten years of after-sales service and spare parts.