1983
A start, for self-reliance
Fater Electronic was founded under Ali Arghavan so that the equipment of medical diagnostic, research and industrial laboratories would be built in Iran, and fewer imports needed.
Maker of laboratory equipment and test chambers · since 1983
Exact conditions,every time, in every test.
Environmental test chambers, pharmaceutical stability rooms, incubators, ovens and laboratory freezers, designed and built by Fater, with touch control and direct support from the maker.
- 0.1 °C temperature display resolution
- 3 years warranty
- Free installation in every city
ACH620LRunningDrug stability, long term
TemperatureSet 25.0 · Tolerance ±225.0°C
HumiditySet 60 · Tolerance ±560.0%RH
Step 3 of 10Run time128:04:17
43years
making laboratory equipment
since 1983, led by Ali Arghavan
10,000+
units in service
in laboratories across Iran
200+
device models
designed and built by Fater
2,500m²
factory
Baharestan Industrial Town
10years
service and spare parts
with a free three-year warranty
Fater products
All productsFrom drug stability chambers to hot plates
More than two hundred models, all designed and built in Fater's factory.
4 products
Pharmaceutical stability test chambersTo ICH; from two-chamber units to 25,000 L walk-in rooms1 productEnvironmental test chambers-40 to 120 °C; 200, 500 and 1000 L8 products
IncubatorsStandard, refrigerated and shaking5 products
Germinators (growth chambers)Light, temperature and humidity control
Pharmaceutical stability test chambersTo ICH; from two-chamber units to 25,000 L walk-in rooms1 productEnvironmental test chambers-40 to 120 °C; 200, 500 and 1000 L8 productsIncubatorsStandard, refrigerated and shaking5 productsGerminators (growth chambers)Light, temperature and humidity control
Laboratory ovens2 products
Laboratory freezers5 productsCement curing cabinets2 products
Water baths2 products
Water distillers4 products
Laboratory hoods2 products
Flame photometers4 products
Centrifuges1 product
Laboratory shakers2 products
Heating mantles3 products
Hot plates4 productsAll products49 productsBuying guide
What does your lab do?
Pick your field and your task to see the devices we build for it, and why each one.
Medical
Equipment for diagnostic, hospital and medical-university labs, with Ministry of Health manufacturing licences
Open the buying guideCommon tasks
Microbial culture and bacteriology
Incubating plates and culture media at a steady temperature, usually 37 °C.
Digital incubator 60 °CAmbient to 60 °C; 55 to 400 LB629B631B632B640
Touch control refrigerated incubatorWhen the room is warm or you need a lower set point: -20 to 60 °CCB629TCCB631TCCB632TCCB640TC
Digital shaking incubatorFlask cultures with shaking at 20 to 120 rpmBS629BS631BS632Sodium and potassium measurement
Measuring serum and urine electrolytes with a clinical flame photometer, supplied with an air compressor.
Medical flame photometer with digital displayDigital display; Corning design620CMedical analog flame photometerAnalogue dial; simple to use, with a low consumables cost405CSerum separation and serology
Centrifuging blood samples, water baths for serology tests and shakers for mixing samples.
Centrifuge, 16 tubes, 4000 rpm16 tubes at up to 4000 rpm, with a timerFS616Digital boiling and serology water bathBoiling and serology bath up to 100 °CW607DW610DW614DW629DDigital rotator shakerOrbital motion with digital speed and time control; reciprocating and rocking models are also builtFR602Safe work with infectious samples and chemicals
A protected workspace for biological samples, and fume extraction when working with reagents.
Class II biosafety cabinet (laminar flow)Class II with a HEPA filter; 80 to 240 cm wideLH608LH610LH612LH615+2
Chemical fume hoodChemical fume hood with an acid-resistant ceramic or granite worktopCH608CH610CH612CH615+2Dry-heat sterilisation and distilled water
Sterilising and drying glassware, and distilled water for reagents and analysers.
Digital laboratory oven 200 °CUp to 200 °C for dry-heat sterilisationU629U631U632U640
All-steel single distillation water distillerSingle distillation, all steel; 4, 8 or 12 L/h600460086012All-glass double distillation water distiller 4 L/hDouble distillation, all glass, for purer water6204G
Pharmaceutical
From stability studies to microbial control: equipment for pharmaceutical QC and R&D labs
Open the buying guideCommon tasks
Stability testing
Samples sit for months at a fixed temperature and humidity, and every change must be on record. Fater Electronic stability chambers cover 4 to 45 °C and 40 to 85 % RH; every common ICH condition is inside this range.
Pharmaceutical stability chamber with 2 chambers and separate controlTwo conditions at once, such as long term and accelerated; each 300 L chamber has its own controlXPH3D
Pharmaceutical stability chamber with 4 chambers and separate controlFour conditions side by side in one unit, for a full stability programmeXPH3QPharmaceutical stability chamber 300 to 2000 LOne condition for a large sample load; 300 to 2000 LXPH3XPH6XPH10XPH20
Walk-in pharmaceutical stability chamber up to 25000 LA walk-in room of 10,000 or 25,000 L for whole batchesXPH100XPH250Microbial testing and contamination control
Incubating culture media for microbial limit tests and environmental monitoring, and handling samples in a protected workspace.
Touch control incubator 60 °CCultures from ambient to 60 °C, with a colour touch displayB629TCB631TCB632TCB640TCDigital refrigerated incubatorWhen the set point is near or below room temperature: -20 to 60 °CCB629CB631CB632CB640Class II biosafety cabinet (laminar flow)Class II with a 99.997 % HEPA filterLH608LH610LH612LH615+2Drying, moisture determination and dry-heat sterilisation
Drying samples and glassware, finding the moisture content of raw materials, and sterilising glassware with dry heat.
Touch control laboratory oven 200 °CColour touch display and data logging, 55 to 400 L; programmes to orderU629TCU631TCU632TCU640TCDigital laboratory oven 200 °CDigital PID control for everyday workU629U631U632U640Cold storage of samples and sensitive materials
Keeping reference samples, sensitive raw materials and reagents at a low, steady temperature.
Touch control laboratory freezer -70 °CDown to -70 °C, with data logging and a temperature alarmXF620 TCXF640 TCTouch control laboratory freezer -40 °C-40 °C, 200 or 400 L, with data loggingCF620L TCCF640L TCDigital laboratory freezer -30 °C-30 °C for everyday storageCF620HCF640HDistilled water and sample preparation
Distilled water for solutions and culture media, and the daily work of heating, stirring and separating.
All-glass double distillation water distiller 4 L/hDouble distillation, all glass, with a quartz-sheathed element, for higher purity6204GDigital boiling and serology water bathWater bath up to 100 °C, 7 to 29 LW607DW610DW614DW629D
Hot plate magnetic stirrer 400 °CHeats and stirs a solution togetherHS600Centrifuge, 16 tubes, 4000 rpmSeparates 16 tubes at up to 4000 rpmFS616Common tasks
Germination and plant growth
Seed germination tests, seedling growth and tissue culture under control of temperature, humidity, light and time. Light on each shelf is set separately, from 0 to 100 %.
Touch control germinator 200 to 2000 LOne regime with a large load, 200 to 2000 L; data logging to an SD cardX612TCX615TCX6120TCX6200TCTouch control four-chamber germinatorFour temperature and light regimes at once; each 100 L chamber has its own controlX6104 TC
Touch control eight-chamber germinatorEight 100 L chambers for large trials; four separate controls, each for two chambersX6108 TCDigital germinator 100 to 2000 LDigital PID control; 100 to 2000 LX610X620X650X6120+1Food microbiology and quality control
Incubating food samples for microbial counts, and flask cultures with shaking.
Touch control incubator 60 °CAmbient to 60 °C, with a colour touch displayB629TCB631TCB632TCB640TCDigital refrigerated incubatorBelow room temperature: -20 to 60 °CCB629CB631CB632CB640Touch control refrigerated shaking incubatorShaking and cooling together; 0 to 60 °CCBS629TCCBS631TCCBS632TCMoisture and dry matter
Drying food, seed, forage and soil samples to constant weight.
Digital laboratory oven 200 °CDigital PID control; 55 to 400 LU629U631U632U640Touch control laboratory oven 200 °CColour touch display and data logging; programmes to orderU629TCU631TCU632TCU640TCSoil, fertiliser and plant analysis
Measuring sodium and potassium in soil, fertiliser and plant extracts, and digesting and heating samples.
Industrial digital flame photometer (research)Digital, with automatic calibration; supplied with an air compressor620GDigital three-position heating mantleThree 500 mL flasks at once; each position has its own temperature controlHD623
Digital hot plate 400 °C 30 × 4030 × 40 cm stainless-steel plate up to 400 °CHD602Distilled water and daily work
Distilled water for solutions, water baths for samples and shakers for mixing.
All-steel single distillation water distillerSingle distillation, all steel; 4, 8 or 12 L/h600460086012
Digital shaking water bathShaking water bath, 14 and 29 LWS614DWS629DDigital rotator shakerOrbital motion, digital speed and time; reciprocating and rocking models are also builtFR602Common tasks
Environmental testing of parts
Putting automotive, electronic, telecom and plastic parts through defined cold, heat and humidity.
Environmental test chamber -40 to 120 °C200, 500 and 1000 L; computer link and an SMS alarm when temperature or humidity leaves its range; temperature ramps to orderACH620LACH650LACH6100Curing cement and concrete specimens
Holding specimens at a controlled temperature and humidity through the curing period, with time control.
Touch control cement curing cabinet200 and 500 L; 10.4-inch colour touch display and data logging to an SD cardXIC620 TCXIC650 TCDigital cement curing cabinet200 and 500 L with digital control of temperature, humidity and timeXIC620XIC650Drying samples and heat testing
Drying samples to constant weight and holding parts at high temperature.
Touch control laboratory oven 200 °CColour touch display and data logging; programmes to orderU629TCU631TCU632TCU640TCDigital laboratory oven 200 °CDigital PID control; 55 to 400 LU629U631U632U640Chemical and elemental analysis
Measuring sodium, potassium, lithium, calcium and barium by flame photometry, and heating and digesting samples under a hood.
Industrial digital flame photometer (research)Digital, with 1-, 3- or 5-point automatic calibration620G
Digital six-position heating mantleSix 500 mL flasks at once, digital PID controlHD626Chemical fume hoodChemical fume hood with an exhaust fan; 80 to 240 cm wideCH608CH610CH612CH615+2Cold testing and low-temperature storage
Keeping materials and samples at a low, steady temperature.
Touch control laboratory freezer -70 °CDown to -70 °C, with data logging and a temperature alarmXF620 TCXF640 TCDigital laboratory freezer -40 °C-40 °C, 200 or 400 LCF620LCF640LFater engineering
View the productInside a Fater chamber
Tap any point. Every figure is from the data sheet of the ACH620L environmental test chamber.
A 10.4-inch colour touch display shows the control parameters graphically. The temperature range is -40 to 120 °C, with a 0.1 °C display resolution and a ± 0.5 °C tolerance. Ten settable programmes and temperature ramps for heating and cooling are available to order.
The door has a double-glazed window to see into the chamber.
A special silicone gasket around the door, and refrigeration-grade foam around the chamber.
The inner chamber is stainless steel. An ultrasonic humidifier provides up to 98 % RH, with a ± 3 % RH tolerance.
An imported compressor, indirect refrigeration and two circulation fans for an even temperature.
Monitoring from a computer, logging day and night, and an SMS alarm when temperature or humidity leaves its range.
From a few devices to more than two hundred models
The work began with a handful of devices. The R&D unit, with experienced engineers and university professors, grew the range to more than two hundred models.
The Baharestan factory
A 2,500 m² factory in Baharestan Industrial Town, on the Tehran–Qazvin highway, with an operating licence from the Tehran Province industries office.
Today
Touch control, remote monitoring
Colour touch controllers of Fater's own design, a PC link, logging day and night and SMS alarms; and more than 10,000 units in service across Iran.
After you buy
From the order to ten years on, beside you
We build every device ourselves, install it ourselves and look after it ourselves.
- 1Needs and proposal
Fater's engineers assess what the lab needs and send the options, the delivery time and the price as one proposal.
- 2Design and build
Each device is built in Fater's factory to the order, the legal requirements and the standards.
- 3Free installation
At your laboratory, in every city of the country.
- 4Regular visits, free upgrades
Regular after-sales visits, and free upgrades of the device's software.
3 yearsFree warranty
10 yearsService and spare parts
FreeInstallation in every city
After-sales service021-44909400Quality
See the certificatesQuality, certified
Ministry of Health manufacturing licencesMedical Equipment Directorate, Ministry of HealthMinistry of Industry operating licenceMinistry of Industry, Mine and TradeISO 9001 and ISO 13485 certificatesURS, United Kingdom
- ISO 9001 and ISO 13485 certificates from URS (UK)
- Works under the rules of the General Directorate of Medical Equipment
- Member of the guild of medical, dental and laboratory equipment makers
- Operating licence from the Tehran Province industries office
Laboratory software
Fater Control: every device on one screen
See your lab's Fater chambers and incubators from your computer: live values, alarms, history and reports.
- Live temperature and humidity of every device
- An alarm when a value leaves its range
- History and reports to document a test
For Fater customersmacOSWindows
Knowledge
All articlesKnow before you buy
Catalogues and forms
Get the catalogue of any group; files save under a clear name.
PDFPharmaceutical stability test chambersFater-Pharma-Stability-Chamber-Catalogue.pdfPDFEnvironmental test chambersFater-Environmental-Test-Chamber-Catalogue.pdfPDFIncubators, touch controlFater-Incubator-Touch-Catalogue.pdfAll downloadsOffice time
- Central sales office021-88552340
- After-sales service021-44909400
- Central sales office[email protected]
- No. 8, Unit 7, 14th Street, Vozara (Khaled Eslamboli) Street, Tehran
| Saturday – Wednesday | 08:00 – 16:00 |
|---|---|
| Thursday | 08:00 – 13:00 |
| Friday | Closed |